VALENCIA ENERGY MOTOR DYNAMOMETER PRELIMINARY TEST DATA ON EARLIER MODEL.
Input Power------------------12 volts dc (of a 24 volt dc system, making use of a 12 volt standard starter motor).
RPM------------------------------2550 RPM constant.
Torque---------------------------66 lbs. / constant.
Horsepower-----------------------100 HP.
Brake Horsepower-----------------32.05.
Foot-pounds/minute---------------1.057.650.
Foot-pounds/second---------------755 lbs. (includes 220 lbs for two 12-volts batteries).
Volume---------------------------45" long x 24" wide x 22" high. (This is overall geometry the motor is a 16" dia. x 24" cylinder).
Test Run Time--------------------21.5 minutes.
Battery Voltage------------------25.7 volts. Reading at test completion.
Ambient Temperature--------------84 degrees constant.
Humidity-------------------------51%.
Fuel Consumption-----------------None (other than air).
Cooling--------------------------Conduction / 1/2 pound (flow through) air pressure.
Magnetic Field Orientation------360 degrees-all directions during motor operation.
Lubrication----------------------High temperature bearing grease (2 bearings).
Vibration------------------------Negligible.
Noise Level----------------------No direct reading taken - without shielding, no louder than small appliance, e.g., computer fan, etc.
Power Hazard---------------------Fully secure - full design safety features.
Start Mode-----------------------Simple push button - standard 12V starter motor.
Operating Mode-------------------Rheostat principle with switchable RPM range(500-1300-1950-2550-3350-4100 RPM's).
Physical Condition---------------Motor mounted on chassis with engine mount in the test stand – no external connections to stand.
Thank You.
E-mail: info@ValenciaEnergy.com